Align the handlebars with the stem and tighten the screws. Ensure they are centered and at a comfortable angle before fully tightening.
Use the twist or thumb throttle for instant power without pedaling.
: Ensure the battery is locked into the frame and the physical switch on the battery itself (if present) is set to the "I" (On) position. Zpao Electric Bike Manual
Before you call customer support or haul your bike to a shop, the Zpao manual’s flow chart can fix 90% of common issues. Keep it next to your charger.
Setting C2 above 17A will overheat the motor on steep hills. Align the handlebars with the stem and tighten the screws
ZPAO bikes typically feature a 3.5-inch LCD multifunctional display. Power On/Off : Press and hold the (Mode) button for 3–5 seconds. Riding Modes Pure Electric : Uses the throttle alone. Pedal Assist (PAS)
To access the background settings menu (often called P-settings), turn on the display, then for a few seconds. Use the (+) and (-) buttons to change values, and the Power button to switch between program codes. : Ensure the battery is locked into the
Press the Up (+) button to increase motorized assistance, or the Down (-) button to decrease it. Levels typically range from 0 (no assist) to 5 (maximum assist).
The Lithium-ion battery is the heart of your Zpao e-bike. Proper maintenance ensures optimal range and safety. Charging Procedure Turn off the e-bike power switch before charging. Plug the charger into the battery charging port first. Plug the charger power cord into a standard wall outlet. Red Light: The battery is actively charging. Green Light: Charging is complete.