Xzent X-422 Software Update Portable | PREMIUM × Version |

Confirm the update prompt. The system will restart and begin flashing the new software.

The system should automatically detect the new software and prompt you to start the update. If it does not, you may need to go to Settings > Others > Update .

navigation card, updates for map data are handled separately via the Naviextras Toolbox . You will need to remove the map microSD card from the device and connect it to your PC to sync with the Toolbox. Software Update Manual X-422 v1.3 - XZENT

With your preparations complete, follow these steps to update your X-422. The entire process takes approximately for the APP and MCU update. xzent x-422 software update

Double-click the downloaded executable to open the built-in self-extracting zip tool.

Are you experiencing a (like a smartphone connection error)?

: Do not turn off the engine or disconnect power while the progress bar is moving, as this can cause permanent system failure. Produktarchive: Manuals - XZENT Confirm the update prompt

Try using a different USB stick, as some older units are picky about USB drive brands. Alternative: Naviextras Toolbox (Navigation Updates)

Log into your account or register your card to review your active mapping subscriptions.

You need a high-quality USB stick with a capacity between 4GB and 32GB. If it does not, you may need to

The USB drive must be formatted to the FAT32 file system. Updates will not register if the drive is formatted to NTFS or exFAT.

A progress bar will appear. This usually takes between 3 to 10 minutes. The screen might flicker or go dark momentarily; this is normal. 5. Factory Reset (Crucial Step)