Xmeye-linux Jun 2026

: Written in Go, this project acts as a bridge, capturing alarm events from IP cameras and forwarding them to an MQTT broker. This is essential for integrating XMeye cameras into broader home automation systems like Home Assistant or OpenHAB.

: A "zero-dependency" streaming application compatible with Linux (and other OSs) that supports the protocols used by XMEye cameras.

If you use xmeye-linux:

Xiongmai-based devices broadcast standard H.264 or H.265 feeds. The typical URL syntax for local network connections requires the device IP address, a communication port (the default is usually 554 ), and specific stream channels:

: You can visit xmeye.net to log in via the cloud. xmeye-linux

If you absolutely require the official desktop interface (CMS/VMS) provided by the hardware manufacturer to change deep device configurations or utilize the P2P Cloud ID feature, you can attempt to run the Windows application using . Prerequisites Install Wine on your system (example for Ubuntu/Debian): sudo apt update sudo apt install wine64 winetricks Use code with caution. Installation Steps

: It easily ingests the local RTSP streams from your hardware, allowing you to bypass the cloud entirely. Agent DVR / iSpy : Written in Go, this project acts as

: Navigate to the directory containing the Xmeye installer and run it using Wine:

base64", "payload": "The snapshot data"

Configure your firewall (using iptables or nftables ) to block all internet-bound traffic from your XMEye devices. They should only be accessible from your local network. If a device can't reach the internet, it can't "phone home" or be exploited from the outside.