You can program the 16 memory channels of your WLN radio using three primary methods:
The Wln Kd-c100 Programming Software is a tool used to program and configure the KDC100 controller, which is a popular device in industrial automation and control systems.
: Uses a standard Kenwood-style 2-pin USB-to-Serial cable.
CHIRP is a free, open-source, community-driven radio programming tool that supports hundreds of radio models, including the WLN KD-C100 (often listed under its clone names, such as Retevis RT22 or Zastone X6).
Before diving into software, it's helpful to understand the device itself. The WLN KD-C100 is a compact, portable UHF analog radio, notable for its hidden display that blends into the body, showing only essential info like the channel, battery level, and transmission power. It operates on the UHF frequency range of with an output power of 3 Watts , and offers up to 16 programmable channels for communication. Wln Kd-c100 Programming Software Free
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Add CTCSS or DCS codes to eliminate interference from other users on the same frequency.
The factory software is the standard tool provided for these radios. It is lightweight and designed specifically for the 16-channel layout of the KD series. You can often find the setup files on sites like Cape Avionics or specialized radio forums. Look for files named KD-C1_SETUP.exe Setup Tip: Some users recommend updating the config.ini
: Since the KD-C1 is often rebranded as Zastone, their software is frequently compatible with WLN units. Required Hardware Programming Cable : Use a standard K-type (Kenwood/Baofeng style) 2-pin USB programming cable. You can program the 16 memory channels of
Installation and setup
The factory settings on the WLN KD-C100 may not always align with your specific communication needs or local regulations. Programming your radio unlocks several critical benefits:
Adjust the filter sensitivity to eliminate background static noise.
Firmly insert the 2-pin K1 plug into the side microphone/speaker port of the radio. Make sure it snaps completely into place. Plug the USB side of the cable into the PC. Before diving into software, it's helpful to understand
If you encounter errors like "Failed to connect to transceiver" or "COM Port not found," check the following variables:
CHIRP is a free, open-source, community-driven radio programming tool that supports the WLN KD-C100 (often listed under the profile).
Open CHIRP, click Radio -> Download From Radio . Select your COM port, choose WLN as the Vendor, and select KD-C1 (or KD-C100) as the Model. Click OK.
A free, open-source, and frequently updated programming tool that supports many WLN models.