Voxelab Printer Software

Voxelab’s own slicer is pre-installed on the included SD card.

: Unlocks deep customization over advanced settings like internal perimeter speeds, specialized infill patterns, and temperature towers.

Voxelab Printer Software: A Comprehensive Guide to Slicing and Firmware

: If your exact Voxelab model is not listed, select the Creality Ender 3 Pro profile. Change the printer name to "Voxelab Aquila" and verify the build dimensions match your specific machine (e.g., 220 x 220 x 250mm). PrusaSlicer voxelab printer software

: Designed for beginners with a clean, simplified interface.

Now go slice something useful.

VoxelMaker is not a bare‑bones slicer; it includes a surprising number of features for both basic and advanced users: Voxelab’s own slicer is pre-installed on the included

Your start G-code is wrong. Voxelab Aquila requires G28 (home) and G29 (auto-bed level) in sequence. Fix: In Cura, go to Printer Settings > Start G-code. Replace it with:

Driver conflict or USB cable issue. Fix: On Windows, install the CH340 driver (Voxelab uses cheap USB-to-serial chips). Also, never use a "charge-only" USB cable—you need a data cable.

If you own a Voxelab Aquila (X2, S2, D1, or Pro) filament printer, third-party slicers unlock the true potential of your hardware. These open-source platforms feature advanced algorithms that drastically reduce print times and improve quality. Cura (by UltiMaker) Change the printer name to "Voxelab Aquila" and

For Voxelab resin printer owners, third-party slicers offer vastly superior support generation.

While not "official" Voxelab software, is the most popular slicer for Voxelab Aquila users. The Aquila is famously a Creality Ender 3 clone, meaning it runs on open-source Marlin firmware. Consequently, adding a Voxelab printer to Cura is trivial.

Voxelab provides its own proprietary software for preparing files, but many users also utilize third-party alternatives for more advanced features.

Because many Voxelab printers are clones of popular machines like the Creality Ender 3, they are compatible with almost all major slicing software. : The most widely used slicer globally.

Like Cura, it is easy to configure custom printer settings for Voxelab models.