The information in this guide is for informational purposes only. The author is not responsible for any damage to your printer or data loss. Always ensure you have a backup of your original firmware and configuration before proceeding. Any modifications are done at your own risk.
While the specific steps can vary depending on the motherboard version (e.g., MKS Robin Nano), the general process for updating the Sapphire Pro firmware involves: Preparation:
Updating the firmware on your is the single most effective way to unleash the full potential of its CoreXY hardware . The stock firmware bundled with the MKS Robin Nano two trees sapphire pro firmware upd
: Obtain the firmware files from an official or community source. You will typically need: Robin_nano35.bin (the main firmware binary). assets folder (contains UI icons and fonts for the screen).
Typical values for Sapphire Pro: X and Y ~80.0, Z ~400.0 (varies by leadscrew pitch). The information in this guide is for informational
, the benefits they provide, and a general overview of the upgrade process. The Role of Firmware in 3D Printing
Upgrading the Firmware of the Two Trees Sapphire Pro : A Guide to Enhanced Performance Two Trees Sapphire Pro Any modifications are done at your own risk
Use VS Code with the PlatformIO extension to build the project.
To make sure this guide is as helpful as possible, could you tell me:
Before updating, you must identify which mainboard version your Sapphire Pro uses. Two Trees has shipped the Sapphire Pro with different boards over its production run.
Power on the printer, and the screen will automatically update the interface. 4. Customizing Your Firmware (Marlin)