: Specifically 10mm, 13mm, and 17mm sockets. Metric Allen Wrench Set : Ranging from 3mm to 8mm.
Plug the transformer into your wall outlet and run the low-voltage wire to the rail’s charging point. 4. Calibration and Testing Once assembled, turn the unit on.
Rail brackets (also known as feet) anchor the lift directly to the stair treads, not to the wall.
Before handing the stair lift over to a user, a strict operational testing protocol must be executed.
Test the safety edge sensors on the carriage and footrest. The lift should automatically stop if it encounters an obstacle.
The lift must stop smoothly at the charging contacts without hitting mechanical stops. Troubleshooting Error Codes thyssenkrupp levant stair lift installation manual full
If the chair won't move, ensure the seat is swiveled back to its initial position.
However, even the best machinery is only as good as its installation. Whether you are a certified technician or a confident homeowner seeking to understand the process, having access to the is non-negotiable.
(track mounting, battery backup, swivel seat, rail splices, limit switches, grounding, etc.).
Space the brackets uniformly. Place one bracket on the bottom step, one on the top step, and space the intermediate brackets every .
Disengage the seat swivel lock; the lift must refuse to move. : Specifically 10mm, 13mm, and 17mm sockets
Wire the charger/transformer and plug it into a nearby 220V (or local equivalent) outlet.
The ThyssenKrupp Levant features several integrated safety mechanisms that must be tested individually before anyone rides the lift. Safety Feature Test Procedure Expected Result Depress the edges of the footrest while driving the lift. The lift must stop immediately. Carriage Shroud Sensors
Lay the rail sections on the floor, ensuring the gear rack is aligned.
: Lower the seat frame onto the pillar, ensuring the swivel mechanism locks securely in the forward-facing, riding position. Step 5: Wiring the Charging System
) involves a rack-and-pinion system designed for straight staircases. While the full technical installation manual is typically reserved for certified technicians, the core assembly steps are outlined below based on available technical documentation. U.S. Food and Drug Administration (.gov) Core Installation Steps Rail Assembly Before handing the stair lift over to a
: Sync the wireless call-and-send stations and verify the wired joystick in the armrest is functional. Key Components Levant stairlift User Manual
Place the rail on the stairs, typically keeping a small gap (approx. 10-15mm) between the rail and the baseboard.
This guide serves as a comprehensive overview of the , detailing the necessary steps, tools, and safety considerations required for a successful installation.
: Drive the lift in one direction and gently press the safety edges on the footrest and chassis. The lift must stop instantly . Repeat this test for all directional safety pans.