Thyssenkrupp Levant Stair Lift Installation: Manual !exclusive!

Immediately reinstall the mechanical end stops at the top of the rail. Tighten them to 25 Nm of torque. Never operate the lift without stop-blocks installed.

Test the pressure-sensitive pads on the sides of the chassis carriage.

Repeat this test for all sides of the footrest and carriage covers. Limit Switch Test

Slide the mounting brackets into the T-slots on the underside of the rail. Space the brackets evenly, placing at least one bracket on the first step, one on the top step, and one every three steps between them. Step 4: Setting the Wall Clearance

: Follow the motor unlock procedure: release the joystick, check for obstructions, and push the joystick in the desired direction. If the problem continues, contact a qualified technician —do not attempt to force the chair or perform repairs yourself. thyssenkrupp levant stair lift installation manual

is battery-operated to ensure it works during power outages. Batteries should be kept charged at designated "parking" stations at the ends of the rail.

However, the most important maintenance task is performed by a professional. The manual explicitly states that . For North American users, it is required to carry out regular inspections and tests to Standard A18.1.10. To comply with these requirements please contact your supplier/ installation engineer.

While the is detailed, professional installation offers several benefits:

The thyssenkrupp Levant is a robust, reliable, and safe solution for straight staircases. While finding a public installation manual is not possible for safety reasons, understanding the process—from rail mounting to programming—empowers you to be a well-informed consumer. When you are ready to install one, rely on certified professionals. This ensures your warranty remains valid, your home remains undamaged, and, most importantly, you remain safe. Immediately reinstall the mechanical end stops at the

The motorized carriage is slid onto the rail, followed by the seat assembly.

The carriage, which holds the chair and contains the motor/battery, is attached to the rail.

Before beginning, ensure you have a clear workspace and the necessary tools.

Test the stop button on the armrest to ensure immediate cessation of movement. Maintenance and Care Schedule Test the pressure-sensitive pads on the sides of

Slide the mounting feet into the channel on the underside of the rail. Space the brackets evenly across the staircase. As a rule of thumb, place one bracket on the first step, one on the top step, and space the remaining brackets every 2 to 3 steps. Step 3: Positioning the Rail

The following is an overview of the steps found in the comprehensive technical installation manual. Step 1: Rail Assembly and Mounting

Plug the charger into a wall socket and connect it to the rail.

Once the rail is perfectly straight and correctly positioned, use your level to check the horizontal alignment of each bracket. Screw the brackets into the stair treads using wood screws (for wooden stairs) or masonry anchors (for concrete stairs). 4. Mounting the Drive Chassis and Seat