set the onboard jumper to match your panel's required voltage (3.3V, 5V, or 12V)

The rain battered against the tin roof of Raj’s electronics repair shop, a rhythmic drumming that usually helped him concentrate. But today, the silence in the shop was heavy. On his workbench lay the carcass of a 43-inch LED television. It was a generic brand, the kind that comes from massive factories with no name, only a model number sticker on the back.

:

Do not turn off the power or remove the USB drive while the light is flashing.

Copy the main binary file (usually named LAMV59.bin or MSTFLASH.bin ) directly to the root directory of the USB. Do not place it inside any folders. Step 2: Flash the Firmware onto the Board

Never remove the power cable while the LED light is blinking. Interrupting the update will corrupt the flash IC chip, forcing you to use an external hardware programmer to fix it.

Check the sticker on the back of your LCD panel for: