Sealed and desiccated optical enclosure with optional ZnSe windows for high-humidity environments.
The instrument utilizes a Michelson interferometer with a standard potassium bromide (KBr) beamsplitter, covering a spectral range of 8,300 to 350 cm⁻¹. Optionally, it can be configured with a Zinc Selenide (ZnSe) beamsplitter for high-humidity environments.
Toggle the power switch located on the rear panel of the Spectrum Two. The power LED indicator on the front of the device will flash yellow during self-test routines and turn solid green when ready. Launch the icon from your desktop. spectrum two ftir spectrometer manual free
Whether you are a lab manager setting up a newly acquired secondhand unit, a student preparing for a university lab, or a technician troubleshooting an error, having access to the official user manual is critical.
– Condition monitoring of greases, oils, and fuels to determine whether they remain fit for purpose during their service life. Sealed and desiccated optical enclosure with optional ZnSe
| Accessory | Application | |-----------|-------------| | | Direct analysis of solids, powders, pastes, gels, and liquids without sample preparation. | | HATR (Horizontal ATR) | Analysis of liquids, powders, and pastes using a trough top plate. The HATR user manual details how to optimize pressure for the best peak intensity. | | Diffuse Reflectance | Powdered samples and rough surfaces. | | Specular Reflectance | Thin films and coatings. |
Power off the Spectrum Two and close the software. Unplug and securely reseat the communication cable at both ends. Power on the instrument, wait for its internal initialization beep sequence to finish, and reopen the software. Toggle the power switch located on the rear
The official manual provides a structured approach to maintenance:
| | Main Purpose | Key Sections/Topics | | :--- | :--- | :--- | | User‘s Guide | Comprehensive operation | Warnings, Safety, Installation, Operation, Maintenance, Troubleshooting | | Administrator‘s Guide | IT and software setup | Spectrum software installation, Adding instruments, Configuration, Network connection | | Spectrum Software Guide | Software use | Data collection, Viewing and processing spectral data, Instrument control | | Accessory Guides | Specific accessory use | Installation, Sample analysis instructions for ATR, HATR, etc. | | Spectrum Two N Manual | Dedicated FT-NIR instrument | Installation, Use, Maintenance for the FT-NIR version of the instrument | | Service & Maintenance | Instrument upkeep | User-replaceable parts (e.g., source, desiccant), Maintenance procedures | | Installation Guide | Setting up the instrument | Unpacking, Connecting to PC, Installing Spectrum software |