[new] - Skope Heated Towel Rail Timer Instructions

If you need heat immediately outside your schedule, look for a Hand Symbol or Boost button to bypass the timer for 1–5 hours.

By following these instructions, you'll be able to enjoy the warmth and comfort of your Skope Heated Towel Rail while saving energy. If you have any further questions or concerns, please don't hesitate to contact the manufacturer or a professional electrician.

: Press and hold the MODE and BOOST keys simultaneously for about 3 seconds to enter the programming menu. skope heated towel rail timer instructions

Cycles through the available time blocks and on/off schedules.

Disclaimer: Ensure all electrical work is performed by a licensed professional. Refer to your specific Skope model's manual for model-specific instructions. If you need a more tailored guide, please let me know: The (e.g., TBC, TDC)? If you need heat immediately outside your schedule,

Commonly used as a wall-mounted switch, this timer requires an initial setup to "learn" your routine.

Ensure your current day setting matches the actual day of the week. If the timer thinks it is Sunday on a Monday morning, your weekday schedule will not run. : Press and hold the MODE and BOOST

You can usually choose individual days, "Mon-Fri," or "Sat-Sun." Select the grouping that fits your routine.

button to switch from "Auto" to manual on/off control, bypassing the programmed schedule. Holiday Mode

Some specific Skope wall-mounted heater models (like the ) use a different interface: Turn the power supply on.

: Flicking the wall switch on automatically initiates the Pre-set Function (4 hours active heat, followed by 8 hours off).