: Do not disconnect the cable or power off the meter until the software confirms the update is complete. Key Features Supported
: You will typically need the Flash Loader or Satlink Tools software to facilitate the transfer.
: A Windows-based PC and the USB cable provided with your device. satlink ws-6933 software update
This happens if the wrong firmware file was flashed or power was interrupted. You may need to use an RS232 recovery tool or contact a specialist technician to re-flash the EEPROM chip manually. Post-Update: Restoring Your Satellites
Firmware updates (often referred to as software updates) are not merely for show. For a satellite meter like the , they are necessary for several reasons: : Do not disconnect the cable or power
Older WS-6933 units require a serial connection:
: Download the latest firmware ( .bin or .ssu files) and the update tool from the official manufacturer site or a trusted distributor. This happens if the wrong firmware file was
Turn on the Satlink WS-6933 (or connect the USB cable if instructed by the software to trigger the bootloader).
Write this down. If the available update matches or is older, do not proceed.