Rak283 Blood Pressure Monitor User Manual -

Press the button to toggle between User 1 and User 2 . Press SET to lock in your choice.

Slide open the battery cover on the back of the device. Insert 4 AA alkaline batteries following the polarity (+/-) indicators inside the compartment. Replace the cover.

Press the to cycle through numbers until you reach the current year.

Sit completely still. Do not talk or move your arm during measurement. Inflation or cuff placement issue. rak283 blood pressure monitor user manual

: Blinks when batteries need replacement. 3. Initial Setup and Configuration

When in doubt, reset the device by removing batteries for 1 minute, then reinstall and reset date/time.

Either 4 AA batteries or a USB power port (Note: many models allow for a DC 6V adapter). 2. Proper Preparation for Measurement Press the button to toggle between User 1 and User 2

Plug the air tube connector securely into the air jack on the left side of the RAK283 monitor.

Before measuring, you must configure the device to ensure your records are timestamped correctly.

Built-in sensor alerts you to irregular heartbeats during testing. Insert 4 AA alkaline batteries following the polarity

This is for informational purposes only. For medical advice or diagnosis, consult a professional. AI responses may include mistakes. Learn more Share public link

Slip your arm through the cuff loop. The bottom of the cuff should sit .

Do not consume caffeine, alcohol, or tobacco products for at least 30 minutes prior to measuring.

The top number represents pressure when the heart beats.