A charger/maintainer cannot fix all batteries. Replace if:
Ensure the charger setting (typically 6V or 12V) matches your battery's voltage before plugging it in. cdn.prod.website-files.com Step-by-Step Connection Guide Inspect the Battery:
3.5 Troubleshooting and Maintenance
This indicates the battery is not taking a charge (defective) or the connection is bad. Check your terminal clips and ensure they are tight.
Before plugging in your charger, always ensure you are working in a well-ventilated, dry area.
The display panel communicates the exact status of your battery and the charger's progress.
To ensure user safety and prevent electrical short circuits under the hood, the connection sequence must strictly follow these instructions. Performax™ 1.25-Amp Battery Charger and Maintainer
: Place the charger as far away from the battery as the DC cables allow. Never place the charger directly above the battery, as rising gases can corrode the unit. 2. Making the Connection
Choose the correct battery type (AGM, GEL, or Standard) if your model has specific buttons.
Even with perfect usage, issues can arise. Here is how to get better results when things go wrong:
If you are storing the vehicle for a long time, use the ring terminals to connect permanently to the battery posts.
: Delivering full power to get the battery up to about 80%.