Nokia G-010g-r Manual

Because the ONT does not automatically assign IP addresses in bridge mode, you must temporarily set a static IP on a laptop or desktop computer. Disconnect your computer from your Wi-Fi network.

Locate the fiber drop cable or fiber wall outlet installed by your ISP.

The G-010G-R supports up to 1Gbps. If you are getting slow speeds, ensure you are using a Ethernet cable. Older Cat5 cables are limited to 100Mbps. 6. Technical Specifications nokia g-010g-r manual

: Solid green means the fiber connection is active and authenticated.

A login screen will appear. Enter the factory default credentials found on the sticker located on the bottom of your device. Common factory defaults include: admin | Password: admin Username: ONTUSER | Password: user Username: SuperUser | Password: Admin123 Because the ONT does not automatically assign IP

The ONT is registered, synchronized, and connected to the ISP network. Green (Blinking)

A small recessed button used for rebooting (short press) or factory resetting (press and hold for 10-15 seconds). 2. Installation Steps The G-010G-R supports up to 1Gbps

If you’ve lost your physical copy or your ISP didn't provide one, this guide serves as a comprehensive manual for the G-010G-R. 1. Physical Interface and Ports

Yes, features dual keyhole slots on the back.

Some users who attempt to update the device or spoof its serial number for use on third-party hardware (like Huawei MA5671A SFP modules) encounter the "Fake O5" error. This usually indicates that while the physical connection syncs at the optical level, the OMCI (ONT Management and Control Interface) is failing to negotiate the final IP handshake with the ISP, often due to a mismatch in serial number or vendor ID.

Solid Green or Blinking: An Ethernet connection is established and active.