: Detailed instructions for hot-adding, cabling, and maintaining the disk shelf are provided in the specific documentation NetApp Hardware Universe (HWU) : A configuration resource used to find hardware specifications
Dedicated RJ-45 Ethernet port for remote management (Service Processor). 2. Installation and Hardware Setup
makes drive maintenance highly efficient. However, adding or replacing drives requires adherence to specific guidelines to maintain data integrity. Netapp Naj-1501 Manual
The you are using (e.g., ONTAP 9.x, SANtricity). The exact error code or LED pattern you are seeing. Your current network and cabling topology .
Open the drawer and check individual drive carrier LEDs for a solid amber light. However, adding or replacing drives requires adherence to
Combined Power Supply Units (PSUs) and cooling fans that offer redundancy.
Optimized for low power consumption and high cooling efficiency. 2. Technical Specifications (Datasheet) Based on official NetApp documentation and vendor data, here are the core specifications of the Go to product viewer dialog for this item. Specification Model/Form Factor NAJ-1501 (DS224C/DE224C) / 2U Rackmount Drive Capacity 24 Drives (2.5" Small Form Factor) Drive Types SAS SSD or SAS HDD Interface 12Gb/s SAS I/O Modules (IOM) 2x IOM12 Modules (Redundant) Power Supplies 2x Hot-plug AC Power Supplies (Redundant) Dimensions 3.4" H x 19" W x 19.1" D (8.5 x 48.0 x 48.4 cm) Weight Approx. 45-50 lbs (fully loaded) Operating Temp 50°F to 104°F (10°C to 40°C) 3. Installation and Deployment Guide Your current network and cabling topology
Setting up the NetApp NAJ-1501 is a straightforward process that requires careful planning and execution. Here are the general steps to follow:
Once installed and configured, the DE224C is a managed component of the larger E-Series system. Day-to-day operation is handled by the SANtricity software, which provides all the necessary tools.