Mt8163 Scatter File [best] Official
The progress bar at the bottom will turn red, then yellow as the files copy over. Do not disconnect the cable.
A scatter file acts as a structural blueprint for the MediaTek Flash Tool (SP Flash Tool). It maps out the exact memory layout of the device's eMMC or NAND storage chip.
Connect your device to a computer via a hardware-level readback tool.
Without a scatter file, your computer cannot communicate effectively with a MediaTek chip in bootloader/preloader mode.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. mt8163 scatter file
partition_index: SYS3 partition_name: EBR1 file_name: ebr1.bin is_download: true type: NORMAL_ROM linear_start_addr: 0x280000 physical_start_addr: 0x280000 partition_size: 0x80000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE d_type: FALSE reserve: 0x00
With read back in SP Flash Tool, the scatter file tells the tool where to dump userdata or boot for forensic analysis.
You can copy the code below and save it as MT6735_Android_scatter.txt (SP Flash Tool reads the content, not just the filename).
partition_index: SYS7 partition_name: PROTECT_S file_name: protect_s.bin is_download: false type: NORMAL_ROM linear_start_addr: 0x1500000 physical_start_addr: 0x1500000 partition_size: 0xA00000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: PROTECTED d_type: FALSE reserve: 0x00 The progress bar at the bottom will turn
Anatomy of an MT8163_Android_scatter.txt File
MediaTek chipsets do not use standard partition tables in the same way desktop computers do. Instead, flashing tools like the MediaTek SP Flash Tool require this specific text file to understand exactly where each software component—such as the bootloader, recovery, and system partition—begins and ends inside the physical memory chip.
A MediaTek (MTK) scatter file is the blueprint of your mobile device's storage. If you own an Amazon Fire tablet, an Acer Iconia, or any other budget-friendly device powered by the MediaTek MT8163 processor, understanding the is your key to advanced modification, unbricking, and firmware flashing.
This section contains global parameters of the chipset, such as the platform name ( MT8163 ) and the storage type ( EMMC ). partition_index: The sequential order of the partition. It maps out the exact memory layout of
: Do not attempt to use an MT6582 or MT6753 scatter file on an MT8163 device. It will permanently corrupt the storage controller layout.
- partition_index: 4 partition_name: NVRAM file_name: nvram.bin is_download: true type: NONE linear_start_addr: 0x001C0000 physical_start_addr: 0x001C0000 partition_size: 0x00400000 region: EMMC_USER
If your MT8163 tablet is stuck in a boot loop or refuses to turn on (hard bricked), flashing a stock ROM using the correct scatter file can revive it.
