But note: this requires return routes on your LAN devices or proper subnet routing.
/interface l2tp-server server set enabled=yes default-profile=l2tp-profile authentication=mschap2 max-mtu=1400 max-mru=1400 interface=ether1
/ip firewall filter add chain=input protocol=udp dst-port=4500 action=accept comment="IPsec NAT-T" mikrotik l2tp server setup full
/ip firewall filter add chain=input connection-state=established,related action=accept comment="Allow established/related"
I can provide the exact terminal scripts to resolve the issue. Share public link But note: this requires return routes on your
/ip firewall filter add chain=input protocol=udp dst-port=500 action=accept comment="Allow IPsec IKE" add chain=input protocol=udp dst-port=4500 action=accept comment="Allow IPsec NAT-T" add chain=input protocol=udp dst-port=1701 action=accept comment="Allow L2TP" Use code with caution. 7. Step 6: Enable Proxy-ARP (Crucial Network Step)
Before we begin, make sure you have:
Set the to your desired range (e.g., 192.168.89.10-192.168.89.50 ). Click Apply and OK . Step 2: Configure the PPP Profile