To confirm the update was successful, you can check the current software version on your device: With the mower off, press Power button
simultaneously. The screen should display the current version number.
Register your mower using its serial number if you have not already done so. Navigate to the or Download section.
It is recommended to perform the update while the mower is docked in the charging base to avoid power loss during the process. Step-by-Step Update Guide
Locate the USB port, often protected by a rubber cover on the bottom or back of the robot. Insert the USB drive. landxcape firmware update
: Plug the prepared flash drive into the mower's USB port. Power up : Turn the mower back ON . Installation :
Updating via USB is the standard method for most models (e.g., : Use an empty USB flash drive formatted to FAT32 .
What (Windows or Mac) are you using to download the files?
Before attempting a firmware flash, prepare your equipment to avoid bricking the mower's motherboard. To confirm the update was successful, you can
The display may show "USB" or all lamps may light up and then go out.
Firmware acts as the operating system for your mower's hardware. Just as a smartphone needs software updates, your mower requires firmware updates to function at its best.
Replace the rubber port cap tightly to maintain the mower's weatherproofing.
Landscape Firmware Updates are crucial for several reasons: Navigate to the or Download section
Updating firmware carries inherent risks if not done correctly. To ensure a smooth process:
Even with careful preparation, updates can occasionally fail. If your Landxcape encounters a problem during or after a firmware update, don't worry. Many issues have simple solutions:
⚠️ Do not power off the device during the update process to avoid bricking the unit.
Enter your mower's specific serial number (found on the sticker under the hood or near the battery compartment).
To download the file from the Landxcape website.