Kercan Barcode Scanner Manual Official

Depending on your workflow, you might need to change this behavior:

The laser or light engine only turns on when you pull the physical trigger.

| Feature | Specification | |----------------------|---------------------------------------| | Sensor | CMOS (for 2D models) / Laser (for 1D) | | Resolution | ≥ 4 mil (1D) / ≥ 5 mil (2D) | | Interface | USB, Bluetooth, 2.4G (model dependent)| | Battery (wireless) | 2000 mAh Li-ion | | Operating temp | 0°C to 50°C (32°F to 122°F) |

Available in wired (USB) or wireless (Bluetooth/2.4GHz wireless dongle) variants. kercan barcode scanner manual

Ensure your mouse cursor is actively blinking inside a text field (like Notepad or a search bar). If the cursor isn't active, the scanner has nowhere to send the text.

Kercan Barcode Scanner Manual: Setup, Configuration, and Troubleshooting Guide

Thank you for choosing Kercan. To ensure you get the most out of your device and access all advanced features, please refer to the official user manual below. This guide covers setup, configuration, and troubleshooting for standard 1D and 2D models. Depending on your workflow, you might need to

Hold the scanner 5–15 cm from the barcode for best results.

These are useful if you are integrating the scanner into a kiosk or robotic system.

Plug the USB wireless receiver into your computer. Scan the "2.4G" setting barcode (often found in the provided manual or by scanning "Restore Factory Settings" while connected). Bluetooth Setup: Turn on the scanner. Scan the "Bluetooth Connection" barcode. Open your computer/mobile device Bluetooth settings. Search for "Barcode Scanner" or "HID Scanner" and connect. 2. Configuring Settings via Barcodes If the cursor isn't active, the scanner has

: Saves scanned codes to internal memory (up to 50,000+ codes) to be uploaded to a PC later, useful when working out of wireless range. ⚙️ How to "Generate" a Feature

If you don't have the manual, a universal workaround is scanning a "Enter" barcode from an online generator, but Kercan manuals provide model-specific hex values.

If your scanner behaves erratically or stops transmitting data correctly, resetting it to factory default settings usually resolves the issue.