Ipm17-002 Motherboard Manual Jun 2026

Ensure the 24-pin ATX main power and 4-pin/8-pin CPU power cables are securely plugged in. Reseat the RAM modules in different slots.

Connecting the front chassis cables to the motherboard is often the most challenging part of a custom build. The header on the IPM17-002 uses a standard dual-row 9-pin assignment block (usually missing pin 10 as a key indicator).

The IPM17-002 architecture relies on the . It features an LGA 1151 processor socket specifically designed to support 6th-generation (Skylake) and 7th-generation (Kaby Lake) Intel Core processors. MOBO Manual for Omen Motherboard IPM17-002 - 9491814 ipm17-002 motherboard manual

Supplies standard power to the chipset and expansion slots. Located on the right edge of the board.

Supports up to PC4-23400 (DDR4-2933) and up to 32 GB total (16 GB per slot) on 64-bit systems. 1x PCI Express x16 (Gen 3.0) for graphics. 1x M.2 socket 1, key A for WLAN and Bluetooth. 1x M.2 socket 3, key M for SSD (SATA or PCIe). Front Panel Connector Pinout Ensure the 24-pin ATX main power and 4-pin/8-pin

If you encounter boot issues, BIOS errors, or forgetting a password, clearing the CMOS (BIOS settings) can resolve it. Turn off the computer and unplug the power cord.

Without the manual, you risk:

A very common question from owners of the IPM17-002 is how to connect the front-panel wires (power button, LEDs, etc.) after moving the board to a standard case. HP's proprietary case uses a single-block connector, but a new case will have individual small connectors.

If replacing this board inside a proprietary case (like certain HP Slimlines), verify that the case uses standard ATX power connections and not proprietary 4-pin or 6-pin main power inputs. Share public link The header on the IPM17-002 uses a standard

Located on the right edge of the board. Supplies main power to the motherboard components.

[2] [4] [6] [8] [x] Pin 1 – HDD LED + Pin 3 – Power LED + Pin 5 – Power Button. Pin 7 – Reset Switch (not always used by HP cases) HP Support Community Go to product viewer dialog for this item.