This means your USB dongle is already running Revision 0010 or a newer firmware build (such as Rev 0030, which was released for later hardware iterations). You cannot downgrade firmware using this utility.
The was released by HyperX to address these specific issues, often referred to as a "microphone not working" or "0010" update.
Once "Firmware updated successfully" appears, you must power cycle the device by unplugging and then re-plugging the USB sound card. Critical Considerations hyperxcloudiifirmwareupdaterrev0010 exe file
Understanding the HyperX Cloud II Firmware Updater (Rev 0010)
The updater window will display your current firmware version (e.g., Rev 0005 or Rev 0003) alongside the target update version (Rev 0010). If your device is already at Rev 0010, you do not need to proceed. Step 5: Start the Update This means your USB dongle is already running
Once the update completes, the utility will display: . Click OK and close the updater. Step 2: Power Cycling the Sound Card Unplug the USB connector from your computer. Wait for 5–10 seconds. Reconnect the USB sound card. Step 3: Reloading the Windows Driver
Ensure your HyperX Cloud II headset is firmly connected to its USB control box, and the control box is plugged into the PC. Once "Firmware updated successfully" appears, you must power
Check Device Manager to see if "HyperX 7.1 Audio" is listed under Sound Controllers. Update Fails at 99%
Before running this file, verify your hardware iteration to prevent bricking your peripheral. Headset Version Compatibility Action Required (Pre-2021) Fully Compatible Safe to use the Rev 0010 standalone executable. HP Era Wired Cloud II (Post-2021, featuring HP branding) Incompatible