Keep this backup safe so you can restore your channels after the firmware installation. Step 3: Install the 20181025 Firmware Via the Menu
Release the button and let the device flash automatically. It will restart into the newly installed environment when finished. Post-Installation Setup
Try switching to a different USB port on the box (prefer the rear port if available).
Before beginning the installation, gather the following items to prevent a "brick" scenario (making the device unbootable):
Download the exact file named GTMedia_V8_Nova_20181025.zip (or .bin ) from a trusted satellite support forum or the official GTMedia archive. gtmedia v8 nova firmware 20181025 install
Upgrading firmware may wipe your current satellite configurations. Go to Menu > Tools > USB Backup and save your current User DB (User Database) to your USB drive before proceeding. Step-by-Step Installation Guide
How to Install the GTMedia V8 Nova Firmware (Version 20181025)
Select your firmware file ( V8Nova_20181025.bin ) from the file list. Highlight and press OK on your remote.
Method B: Forced Recovery Upgrade (For Bootloops or "Load" Errors) Keep this backup safe so you can restore
Warning: Do not turn off the power or unplug the device during this process, as it may brick the box.
Set the Upgrade Mode to or Software (AllCode is recommended for a clean installation).
With your hardware and files prepped, follow these installation steps carefully.
Insert the prepared USB flash drive into the USB port located on either the front or back panel of the receiver. Post-Installation Setup Try switching to a different USB
Before beginning, identify if your device is the (AV output) or Orange cover (SCART output) model, as firmware files are model-specific. Step 1: Preparation USB Drive : Use a USB stick formatted to FAT32 .
Release the button and let the update process finish completely. Step 4: Post-Installation and Configuration
Locate the extracted .bin file (it should look similar to V8_Nova_20181025.bin ).
Use a high-quality USB 2.0 or USB 3.0 flash drive with a capacity of 32GB or less.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.