Fortigate 30d Factory Reset [portable] Full Jun 2026

After reboot, the device reverts to factory settings. If the previous owner disabled the reset button via config system admin or the OS is corrupted, this method will fail.

Ensure the device is powered on and fully booted up (the status LED should be solid or blinking normally).

For advanced TFTP recovery, you'll also need: fortigate 30d factory reset full

This guide covers the three definitive methods to fully factory reset a FortiGate 30D: using the CLI command, utilizing the physical reset button, and performing a TFTP firmware reload for a true bare-metal wipe. Method 1: The CLI Command (Recommended)

The FortiGate 30D is a legacy desktop firewall (End-of-Support announced for 2024). A full factory reset erases all configuration (interfaces, policies, users, routing) and restores default settings (e.g., IP 192.168.1.99 with admin / no password). Use this before disposal, repurposing, or recovering from a lost password/bricked state. After reboot, the device reverts to factory settings

Watch the front panel LEDs; they should flash to indicate the reboot process has started.

Given that the FortiGate 30D no longer receives firmware updates (last supported version: FortiOS 6.0.x), many security experts recommend retiring it. However, for air-gapped labs, isolated test networks, or learning Fortinet CLI, a breathes new life into the hardware. For advanced TFTP recovery, you'll also need: This

Type reboot or cycle the power. The FortiGate will reload like new. Default credentials are: