Lists all current active alarms on the network element, ranked by severity (Critical, Major, Minor). show alarm history Use code with caution.
| Command | Description | |---------|-------------| | enable | Enter privileged mode | | disable | Return to user mode | | configure terminal ( conf t ) | Enter global config | | exit / end | Move up one level / return to privileged mode | | ? | Context-sensitive help | | <command> ? | Show arguments for a command | | show history | Show command history |
MINI-LINK uses standard protocols like FTP or SFTP to move files.
Use this to verify that your gateway or switch is reachable from the Mini-Link perspective. ericsson mini link cli commands
Ericsson CLI allows abbreviations as long as the command is unique.
Loopbacks are essential for isolating whether an issue resides on the local site, remote site, or the microwave path.
interface ethernet 1 switchport mode trunk switchport trunk allowed vlan 100,200 exit Lists all current active alarms on the network
clear configuration : Resets the node back to factory default settings.
: Used in operational mode to view system status (equivalent to user EXEC mode).
show hardware : Lists all physical modules, cards, and pluggable transceivers (SFPs) installed in the chassis. | Context-sensitive help | | <command>
Always save your changes to permanent memory to prevent data loss during a power cycle.
| Mode | Prompt Example | Purpose | |------|----------------|---------| | User Exec | MINI-LINK> | Basic monitoring, pings, show commands (limited) | | Privileged Exec | MINI-LINK# | All show commands, debug, clear counters, reload | | Global Config | MINI-LINK(config)# | System-wide settings | | Interface Config | MINI-LINK(config-if-eth0)# | Port-specific settings | | Radio Config | MINI-LINK(config-mdradio)# | Radio parameters (frequency, power, ID) |
Labeling your node is critical for network management. A generic name like "MINILINK" makes troubleshooting a nightmare for the NOC.
Commonly 10.0.0.1 or a dynamically assigned management IP. Default Username: om_admin or admin
The active alarms show what is broken now , but the log shows what broke yesterday .