Equatech Universal Tv Wall Mount 32 To 100 Instructions -

: For ideal ergonomics, the center of the television screen should sit roughly at eye level when you are seated in your primary viewing spot.

: Place the TV face-down on a soft, flat surface like a blanket to prevent screen damage.

The manual guides the user through the process of locating studs using a stud finder, marking drill points, and ensuring the plate is perfectly level. The unique challenge with universal mounts for large TVs (up to 100") is the width of the wall plate. The instructions often allow for lateral adjustment, but the primary directive is to hit the center of the studs. The Equatech design usually features a wide mounting plate to span standard 16-inch stud spacing, providing a robust foundation. Adhering strictly to these instructions ensures that the mount can support the dynamic load of the television without risking pull-out or tipping. equatech universal tv wall mount 32 to 100 instructions

: This mount supports standard VESA patterns, commonly ranging from 200x100mm up to 600x400mm. Check your TV's manual or measure the distance between the four screw holes on the back to ensure a match.

Having the right tools on hand before you begin will save you significant time and frustration. You will likely need: : For ideal ergonomics, the center of the

The specific drill bit you need will depend on your wall type:

Hold the wall plate back up, aligning it with the fresh pilot holes. Insert the heavy-duty lag bolts with washers through the wall plate. Tighten them firmly into the wall using a socket wrench until the plate is flush against the drywall. Double-check with your level before giving the bolts their final turn. Option B: Solid Concrete or Brick Installation The unique challenge with universal mounts for large

“Universal” means the mount fits most TV brands, but it still requires a matching . VESA (Video Electronics Standards Association) is the distance (in mm) between the four mounting holes on the back of your TV.

: The Equatech mount has a maximum weight capacity of 55 kg (approximately 121 lbs). Never exceed this limit. Your TV's weight can be found in its user manual or often on the manufacturer's website. Exceeding the weight capacity could result in catastrophic failure and serious injury.

: Measure the distance from the top hook of your TV's vertical brackets to the bottom of the TV frame. Use this offset measurement to mark exactly where the top edge of the wall plate needs to rest on the wall. Step 3: Install the Wall Plate