or your local supplier to ensure you receive a version compatible with your hardware revision. Regional Repositories : Sites like the Hikvision Europe Portal
Ensure the firmware matches these hardware capabilities to avoid bricking the device: : Supports up to 4-ch at 720P or 2-ch at 1080P. : Supports 1 SATA interface for up to 4TB HDD. : Includes 4 independent 10/100 Mbps PoE interfaces. Compression
The Hikvision DS-7104NI-SN/P is a reliable, entry-level 4-channel Network Video Recorder (NVR) featuring built-in Power over Ethernet (PoE) ports. As network security standards tighten and new ONVIF profiles emerge, updating the underlying software on this legacy device is crucial to prevent system hangs, boot loops, and unauthenticated network access.
: Newer builds can improve video compression (H.264), reduce storage consumption, and enhance the responsiveness of the web interface.
Official firmware should only be downloaded from the or via authorized distributors.
The DS‑7104NI‑SN/P has been subject to several security advisories over its lifespan. Users running outdated firmware should prioritize updates to protect their systems.
The Hikvision DS-7104NI-SN/P is a phased-out (legacy) 4-channel Mini NVR
If you cannot find the file on the global site, contact the vendor or security installer who sold you the unit. They often have access to the "Dealer" portal where legacy firmwares are hosted.
Enhances the web interface for easier configuration. Finding the Correct DS-7104NI-SN/P Firmware
Once you have taken the necessary precautions, follow these steps to update your DS-7104NI-SN/P:
There are two primary methods for updating the DS-7104NI-SN/P, both of which require caution. Method A: Updating via Web Browser (Recommended)
Newer firmware adds support for updated ONVIF profiles, allowing the NVR to seamlessly discover, connect, and record from newer third-party IP cameras.
Never turn off the NVR during a firmware update. This will irreparably damage the system.
Sometimes, after a major firmware update, performing a factory reset is recommended to ensure all new settings load properly. Troubleshooting Firmware Issues If the update fails or the NVR acts erratic:
or your local supplier to ensure you receive a version compatible with your hardware revision. Regional Repositories : Sites like the Hikvision Europe Portal
Ensure the firmware matches these hardware capabilities to avoid bricking the device: : Supports up to 4-ch at 720P or 2-ch at 1080P. : Supports 1 SATA interface for up to 4TB HDD. : Includes 4 independent 10/100 Mbps PoE interfaces. Compression
The Hikvision DS-7104NI-SN/P is a reliable, entry-level 4-channel Network Video Recorder (NVR) featuring built-in Power over Ethernet (PoE) ports. As network security standards tighten and new ONVIF profiles emerge, updating the underlying software on this legacy device is crucial to prevent system hangs, boot loops, and unauthenticated network access.
: Newer builds can improve video compression (H.264), reduce storage consumption, and enhance the responsiveness of the web interface. ds-7104ni-sn p firmware
Official firmware should only be downloaded from the or via authorized distributors.
The DS‑7104NI‑SN/P has been subject to several security advisories over its lifespan. Users running outdated firmware should prioritize updates to protect their systems.
The Hikvision DS-7104NI-SN/P is a phased-out (legacy) 4-channel Mini NVR or your local supplier to ensure you receive
If you cannot find the file on the global site, contact the vendor or security installer who sold you the unit. They often have access to the "Dealer" portal where legacy firmwares are hosted.
Enhances the web interface for easier configuration. Finding the Correct DS-7104NI-SN/P Firmware
Once you have taken the necessary precautions, follow these steps to update your DS-7104NI-SN/P: : Includes 4 independent 10/100 Mbps PoE interfaces
There are two primary methods for updating the DS-7104NI-SN/P, both of which require caution. Method A: Updating via Web Browser (Recommended)
Newer firmware adds support for updated ONVIF profiles, allowing the NVR to seamlessly discover, connect, and record from newer third-party IP cameras.
Never turn off the NVR during a firmware update. This will irreparably damage the system.
Sometimes, after a major firmware update, performing a factory reset is recommended to ensure all new settings load properly. Troubleshooting Firmware Issues If the update fails or the NVR acts erratic: