System Check: Once all pulleys are installed, pull firmly on the lat bar and low row attachment. The weight stack should rise and fall smoothly along the guide rods without any scraping sounds or cable catching. 5. Maintenance, Troubleshooting, and Care
Insert the rubber endcaps into the open ends of the stabilizer bars using a rubber mallet if needed. Step 2: Guide Rods and Weight Stack Installation
To help provide further details, let me know if your machine uses a , if you have any leftover parts , or if a specific station like the pec-dec or leg developer isn't moving smoothly. Share public link Dp Dual Trac 20 Assembly Manual
Sweat is corrosive. Wipe the vinyl pads and steel frame after every session.
Selector plates, top plate, selector rod, and guide rods. System Check: Once all pulleys are installed, pull
Assemble the seat support structure and attach it to the base frame. Install the seat pad onto the seat frame. Assemble the guide rods for the weight stack.
: High-density nylon wheels and vinyl-coated steel aircraft cables. Step-by-Step Assembly Instructions Step 1: Constructing the Base Frame Lay the Main Base Rear Crossmember flat on the floor. Wipe the vinyl pads and steel frame after every session
Secure the arm and leg lift paddings using #50 bolts and #61 washers.
The unit typically ships on a heavy-gauge wooden pallet. Check the shipping manifest against the physical components received.