The function selected is not supported by your specific printer model.
Close the software, turn the printer off, wait 10 seconds, and turn it back on normally. Common Error Codes and Troubleshooting Error Code 006
He hit the power cycle. The imagePRESS whirred to life, its status lights blinking a healthy, rhythmic green. It was ready to print ten thousand pages.
Triggers advanced maintenance cycles not available in standard print drivers.
These tools are often flagged as false positives due to their low-level system access. canon service tool v5302
is a proprietary utility software used by factory technicians to diagnose, calibrate, and reset internal components of Canon Pixma printers. Version 5302 is highly sought after because it supports a vast range of newer and legacy Canon printer models, making it the most reliable version for clearing the main waste ink counter. Key Capabilities:
This issue indicates that the printer’s internal waste ink absorber pad is theoretically full. To prevent ink from leaking and damaging your desk, Canon hardcodes a limit into the printer's firmware. Once reached, it locks the machine.
Disclaimer: Using this tool voids your warranty and can cause permanent damage. Proceed at your own risk. This guide is for educational purposes for technicians.
The printer model is not supported by this version of the service tool. The function selected is not supported by your
For a moment, the shop was silent. Then, the imagePRESS shuddered. The motors whined, the fans spun up to a roar, and the LCD screen on the printer flickered from a glaring red "ERROR" to a calm blue "STANDBY."
The Service Tool will not detect your printer if it is turned on normally. You must manually boot the printer into a hidden state called . Follow these steps precisely:
"Print test pattern," he commanded.
MG2120, MG2240, MG2440, MG2570, MG3140, MG3540, MG3600, MG5550, MG5650, MG5750 Canon PIXMA MP, MX, and TS Series MP230, MP250, MP280, MP490 MX395, MX475, MX492, MX535 TS5000, TS6000, TS8000, TS9000 Step 1: How to Enter Canon Service Mode The imagePRESS whirred to life, its status lights
While v5302 supports legacy models, it is specifically valued for its compatibility with modern consumer and office inkjets. Common compatible series include:
Version V5302 is a highly stable release of the software. It expands compatibility to newer MegaTank (G-Series) models and introduces a cleaner interface for resetting the Waste Ink Counters (Main and Platen pad counters). Common Error Codes Fixed by V5302
This is because the service tool will automatically print diagnostic and confirmation patterns during the reset process. 📄 Paper Requirements Use standard office paper ( Load at least before starting.
: Allows reading and printing deep-level system logs and usage data from the printer.
If you reset the counter, you must disassemble the printer, remove the old pads, wash/dry them (or buy replacements), and reassemble.