Balaji Info Lube Gps Tracker 3.0 Driver Download !!exclusive!!

Disconnect your GPS tracker from the computer before starting.

Temporarily disable aggressive third-party firewalls if they block unknown USB setups. Step 2: Download the Driver

The Balaji Info Lube GPS Tracker 3.0 is a widely used fleet management and vehicle tracking device. To configure, update, or retrieve data directly from this tracker via a PC, installing the correct USB-to-serial drivers is an essential first step. Without these drivers, your operating system will fail to recognize the device when connected via a USB cable. balaji info lube gps tracker 3.0 driver download

The driver will assign a virtual COM port. Check the Windows Device Manager to confirm which COM port (e.g., COM3, COM4) is linked to the GPS device. Troubleshooting Installation Issues

After the driver is installed and the tracker is recognised, you can use various software tools to communicate with the device and to view your vehicle's location. Disconnect your GPS tracker from the computer before

: Once installed, open your Aadhaar enrollment software and select 9600 in the baud rate option for proper communication.

Without this driver, your PC will display an "Unknown Device" error in the Device Manager. Installing the software enables tracking platforms, configuration tools, and diagnostic software to read the location logs and modify device parameters. Technical Specifications & Compatibility To configure, update, or retrieve data directly from

Once the is complete:

If you cannot find the branded Balaji driver, you can download the generic driver from the chipset manufacturer’s website. However, note that some Balaji trackers use a modified VID/PID, so the generic driver may not work.