Ansys Your Product License Has Numerical Problem Size Limits Verified !!top!! -

Open the ANSYS License Management Center . Under the "View Status" or "License File" tabs, you can see the specific features (increments) enabled.

If you once exceeded the limit and then reduced your mesh, Ansys sometimes "remembers" the failure. A common workaround is to Update Geometry from Source

A: Yes – 32,000 nodes/elements. The message appears identically. Open the ANSYS License Management Center

The flagship tier. It features completely unlimited node and element sizes, restricted only by your hardware RAM and computing power. How to Verify Your Current Model Size

Commercial licenses are categorized to fit different corporate needs: A common workaround is to Update Geometry from

The message "Your product license has numerical problem size limits, you have exceeded these problem size limits and the solver cannot proceed" is a licensing restriction embedded into specific Ansys software versions, particularly academic and free student licenses. This warning appears when the simulation mesh (comprising nodes/elements for structural simulations or cells for fluid dynamics) exceeds the predefined threshold for that specific license type.

This article is for informational purposes. License limits are subject to ANSYS, Inc. terms and conditions. Always refer to your specific license agreement and contact ANSYS support or your authorized reseller for definitive guidance. It features completely unlimited node and element sizes,

Even if your displayed mesh count is below the limit, the error can trigger due to: Your product license has numerical problem size limits…..

“Maximum problem size for this license is 512000 nodes.”