Change the refresh rate of the monitor/projector to 60 Hz or 75 Hz.
Step-by-Step Guide to Downloading Official Acer X113 Drivers
Always restart your PC after a driver installation to ensure the changes take effect. Troubleshooting Common Connection Issues
The Acer X113 heavily relies on your computer's primary GPU to render the output image. Update your dedicated Intel, AMD, or NVIDIA graphics drivers to the latest version alongside the projector profile. Optimizing Display Settings Post-Installation acer x113 projector drivers
The Acer X113 has a native SVGA resolution of , though it can compress higher inputs up to WUXGA (1920 x 1200). If your laptop output resolution is set too high or uses an incompatible aspect ratio (like ultra-wide), the projector may show a blank screen. Go to your computer's Display Settings . Select the secondary display (the projector).
Complete Guide to Acer X113 Projector Drivers: Downloads, Setup, and Troubleshooting
Some users connect their Acer X113 via USB to use the remote for controlling slideshows. If the projector is not found via USB (indicated by no "USB" option in the Source menu and the computer showing "no projector has been detected"), the issue is often related to how Windows handles the connection. The underlying hardware for this specific remote-control function may not be supported on newer operating systems. Change the refresh rate of the monitor/projector to
| Problem | Real solution | |---------|----------------| | “Driver not found for Acer X113” | It’s plug-and-play; there is no generic display driver to download. | | “Projector not listed in Device Manager” | It appears as “Generic PnP Monitor” under Monitors. | | “3D not working after driver install” | Ensure your source content is 3D (SBS, top-bottom, frame-packed) and your media player supports 3D output. | | “USB connection not doing anything” | Install the USB driver from Acer’s site; USB is only for remote control commands, not video. |
Before searching for exotic drivers, rule out these 5 common issues.
To ensure your computer correctly communicates with the Acer X113, follow these steps to keep your video drivers and system files updated. Step 1: Visit the Official Acer Support Portal Update your dedicated Intel, AMD, or NVIDIA graphics
To update the projector's internal software for better hardware compatibility.
To conclude: If you simply want to project your screen, . Confirm your VGA cable is working, set the projector to VGA input, and press Windows + P.
Once your system drivers are updated, follow these steps to configure your Acer X113 display. Physical Connection Turn off both your computer and the Acer X113.
If your computer doesn’t recognize the Acer X113 when connected:
Right-click the Unknown Device in Device Manager, select Uninstall device , and unplug the cable. Restart your PC, plug the projector back in, and allow Windows to rebuild the hardware stack. 3. Flickering Screen or Distorted Colors